Hik Vision Face Recognition

R11,006.00

DS-K1TA70MI-T face recognition terminal is a kind of access control device, integrated with temperature screening function. It takes fast skin-surface temperature and upload abnormal temperature event to the centre, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.

Category:
Enquire Now

Description

Features:

  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 1.8 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognising face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask wearing alert: If the recognising face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 6000 face capacity, 6000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
  • Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronisation, and auto synchronisation
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  • Imports and export data to the device from the client software

* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

 

Specifications:

Temperature Measurement:

  • Temperature range: 30 °C to 45 °C (86 °F to 113 °F)
  • Sensor: Vanadium Oxide uncooled sensor
  • Resolution: 120 × 160
  • Frame rate: 25 fps
  • Measurement accuracy: 0.1 °C
  • Measurement deviation: ± 0.5 °C, without black body calibration
  • Measuring distance: 0.3 to 1.8 m

Screen:

  • Size: 7-inch
  • Type: Touch screen

Camera:

  • Pixel: 2 MP
  • Lens: Dual-lens

Network:

  • Wired network: Support, 10/100/1000 Mbps self-adaptive

Interface:

  • Network interface 1
  • RS-485: 1
  • Wiegand: 1
  • Lock output: 1
  • Exit button: 1
  • Door contact input: 1
  • IO input: 2
  • IO output: 1
  • Tamper: 1

Capacity:

  • Card capacity: 6000
  • Face capacity: 6000
  • Event capacity: 100,000

Authentication:

  • Card type: Mifare 1 card
  • Card reading distance: 0 to 5 cm
  • Card reading duration: < 1 s
  • Face recognition duration: < 0.2 s per person
  • Face recognition distance: 0.3 to 1.8 m

Function:

  • Face anti-spoofing: Support
  • Live view: Support
  • Audio prompt: Support

Others:

  • Power supply: 12 VDC/2 A
  • Working temperature: 0 °C to 50 °C (32 °F to 122 °F)
  • For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working humidity: 10 to 90% (No condensing)
  • Application environment: Indoor and windless environment use only